Transport Communications Pty. Ltd.
NAVIGATECOMMUNICATESUPPORTPROFILEHOME
 
MT401ff Specifications Bottom of Page
MT401FF Specifications
  MT401FF SPECIFICATIONS
  
Modes of Operation
Activated
 UHF (406) and VHF (homer) complete with high intensity strobe and audible alert.
Self Test
 Comprehensive internal diagnostics with visual and audible operator feedback. UHF test message (inverted synchronisation compatible with portable beacon testers).
Operation
  
Compliance
 GMDSS Compatible and meets the latest IMO A810-19 requirements
Activation
 - Automatically on immersion in water
- Manually by operator
Duration
 48 hours minimum
Transmission
 121.5 and 406 MHz
Delay
 Signals commence ~60 seconds after activation
Warm-Up
 None required (due to digital signal frequency generation)
VHF
 121.5 MHz, 50 mW ±3 dB, swept tone AM
UHF
 406.028 MHz*, 5 W ± 2 dB, PSK (digital)
Strobe
 20 flashes/minute at greater than 0.75 cd effective intensity
UHF Protocol/Data
 Radio Call Sign, Serial Number and MMSI
Repetition Period
 50 s mean digitally generated randomization
VHF
 Satellite compatible phase coherent
  
Battery
Replacement Period
 Prior to replacement date marked on case (6 years)
Replacement Method
 Authorised service centre or factory only (non user replaceable)
Chemistry
 LiS02 (2.4 g Lithium per cell)
No./Size
 2 x 'D' sized cells
  
Physical
Operating
 -20 °C to +55 °C
Storage
 -30 °C to +70 °C
Weight
 555 g (nominal)
Compass Safe Distance
 0.7 meter minimum from magnetic navigational device
Dimensions
 260 mm (H) x 102 mm (W) x 83 mm (D) max. when stowed in bracket
Materials
 UV stabilized plastic chassis
Performance
 IEC 61097; IEC 60945; AS/NZS 4280.1; ETSI EN 300 066
  
Mounting Bracket/Housing
  
Release
 - Automatically before reaching 4 meters depth, or
- Manually by Operator
Protection
 Impact resistant housing fully encloses EPIRB for environmental protection.
Mounting
 At four (4) points to vessel
Housing Weight
 1.1 kg (nominal)
Housing Dimensions
 385.5 mm (h) x 157.5 mm (w) x 102.5 mm (d)
Materials
 Marine grade stainless steel and long life UV Polypropylene stabilised enclosure
Service
 Fully user replaceable HRU at 2 year intervals as per applicable authority requirements
Other Features
Retention Lanyard
 Buoyant type approximately 5.5 metres long
Reflector
 SOLAS retro-reflective tape encircling unit above waterline
Solid-state Strobe
 High reliability solid state 3 emitter design exceeds IMO requirements
Antenna
 Flexible self straightening stainless steel design

*Standard factory setting. Programmable via external interface to operate over 406.000 MHz to 406.100 MHz. Other protocols available.

Specifications are subject to change without notice or obligation.
Our systems include advanced, specialised communication equipment for use over Land.
 
Telstat Supplies & Installs and services the widest range of Communications Equipment including:

 

27 Mhz Band Radios

GPS's

EPIRB's

Satellite Phones

UHF CB Radios

GPS Mapping Units

Marine Charts for Australia

Scanners

Marine Radios

  

Rental Equipment

GPS Accessories

Commercial Radios

GPS Cartography Mapping

Mi-Trek Vehicle Tracking

General 27Mhz and UHF Info

Vertex-Standard Radios

RFDS Information

Car Navigation Turn by Turn

AC & DC Power Products

Main Product Page

HF Radios

  

Black Widow Draw System

Service your Radio and Installations

Second Hand HF Radio's

   

Telstat Clients
    

Telstat Awards

Golf Emergency System Safe-Tee

How to Choose a GPS

 

Telstat Support
 
Please contact us for further information:
 
Phone 03-9786-9422 We accept
Fax03-9786-9610 We also do Phone Orders too.
Email us at Telstat
 
Or visit our showroom at:
52 Brunel Road
Seaford
Victoria
Australia, 3198
Top of Page

Telstat Transport Communications Pty Ltd
Copyright © 1997-2007
Disclaimer

Thursday 16-Aug-2007